You're currently viewing this Site in :
Bahasa Indonesia
In English

These are Tsukatani Hamono MFG Products line ups:

CT-2 Cutter / CT-3 Cutter / CT-5 Miter

Used for cutting the Cutting Rules.

*Click on the thumbnail to enlarge.



CT-6 Cutter / CT-7 Miter

A Single Cutter / Miter which makes leftward or rightward cutting easier. Can perform cutting with a back guide.

*Click on the thumbnail to enlarge.



CT-8 Notcher

Used for bridge portion processing. Bridge depth adjustment is done by only turning the adjusting wheel.

*Click on the thumbnail to enlarge.



CT-9 Cutter / CT-10 Miter / CT-11 Notcher (Dual Type)

A single operation makes it easier to cut the every side of material. It is suitable for cutting materials in both same size and large quantities. Notcher with cutting function is designed for standard cutting width in 6 mm (Machines for long-cutting which have ranges between 3 till 5 mm are also available on request).

*Click on the thumbnail to enlarge.



CT-20 Cutter / CT-21 Miter / CT-22 Notcher (New Type)

A compact cutting part. Easy cut after bending. Available in dual cutter (CT-23 - CT-24).

*Click on the thumbnail to enlarge.



EP-1 Slide Scale For Cutter

Micrometer Spec. Option for CT-2, CT-3, CT-5, CT-6, CT-7

*Click on the thumbnail to enlarge.



EP-2 Slide Scale For Seal Bender

Micrometer Spec. Option for BD-6

*Click on the thumbnail to enlarge.



EP-3 Slide Scale For Bender

Micrometer spec. Option for BD-5

*Click on the thumbnail to enlarge.



EP-4 Slide Scale For Bender

Slide Callipers Spec. Option for BD-5

*Click on the thumbnail to enlarge.



EP-5 Digital Slide Callipers For Cutter

For 600 and 1000 m. Option for CT-9, CT-10, CT-11

*Click on the thumbnail to enlarge.



BD-1 Regular Type Bender / BD-2 Reverse Type Bender

Consists of 4 die types.

*Click on the thumbnail to enlarge.



BD-3 Vertical Type Cutter

Can be selected from cutter, miter, or bridge cutter. Left/ right cutting and double cutting can be done with one die.

*Click on the thumbnail to enlarge.



BD-4 Dual Type Bender

Available for regular and reverse bending. Has 4 die types. Selections available are slide scales.

*Click on the thumbnail to enlarge.



BD-5 Standard Bender

Moving stroke adjustment can be done with one move on the two-stroke steps. Male stopper type is one touch. 36 pieces from standard dies.

*Click on the thumbnail to enlarge.



BD-6 Seal Bender

Equipped with bending and cutting tools. Male stopper type is one touch. Cutter or Miter can be chosen.

*Click on the thumbnail to enlarge.



Jump to Page:

Super G Type

Super G Type is Tsukatani's original product. Mirror-like finishing results very sharp ends which will prevent cutting damage and make cutting easier. They also give smooth and perfect surface and prevent material abrasion or falling off, which cannot be obtained from normal grinding process.

*Click on the thumbnail to enlarge.



Super WG Type

Super WG Type is engineered to prevent the intrusio of paper shards. Tsukatani has applied mirror-like finishing on the first bevel at the outside of the double bevel, which acts as a wear indicator without reducing the edge's sharpness. Therefore, no paper shards created by the remnants of the paper containers or packages.

*Click on the thumbnail to enlarge.



Tempered Creasing Rule

A tempered rule which is made to deliver sharp creasing and handles hard usage condition like large scale pressing work run in high speeds. This rule has a hardness level of Hv450.

*Click on the thumbnail to enlarge.



Non-Tempered Creasing Rule

Easier to handle than Tempered Creasing Rule and has been adjusted for crease material which is slim.

*Click on the thumbnail to enlarge.



Mushroom Creasing Rule

In order to standardize laser depth of the die cutting board, Tsukatani has developed creasing rules based on different body thickness and creasing width. If the creasing width must be changed in conjunction with material changes, the wood pattern being used can be directly used by replacing the rule with Mushroom Creasing Rule.

*Click on the thumbnail to enlarge.



Lompat ke halaman:

NC Punch

NC Punch is an engraving die which is made by precision process as a NC component used for installing knife that the size and the profile is hard to be made by folding the steel cutting rules. Only with using NC Punch as the replacement, therefore it is possible to make cutting dies without quality changes and high difficulty folding, for example arcs, small radius, or ellipse profile.

*Click on the thumbnail to enlarge.



Cannon Ball Punch

Diameter up to 13mm, increment at 0.5mm
Diameter more than 13mm, increment at 1.0mm

*Click on the thumbnail to enlarge.



Side Punch

Increment at 0.5mm

*Click on the thumbnail to enlarge.



Tube Punch

OD = Diameter + 0.7mm (thickness 0.7mm)
OD = Diameter + 1.0mm (thickness 1.0mm)
Increment at 0.1mm

*Click on the thumbnail to enlarge.